Hey guys, need help choosing a cam for my 350. Here's the deal with the heads. I stumbled upon a hell of a deal last week on these rhs pro top line heads that were ported and polished, milled to 62cc from 64, and had 2.05 valves installed for a total of 500 dollars! I couldn't pass them up as he had about $2000 in them and they looked really good. He ran a best time of 11.6 in the 1/4 with nitrous in a stout 434 sb with a mechanical roller from comp with .610 lift. I'm not trying to run 11s in my nova but would like to have a very hot street/strip engine. I know a 350 is far from a 434 with nitrous but wanted to see if you guys could guide me in the right direction. I'm basically going to run a stock bottom end, I have a 650 double pumper Holley, rpm intake 1 5/8 headers with 2.5 flow master exhaust, th350(will be buying a stall converter to match combo),and 3.55 Ina 10 bolt rear end. I haven't taken off the stock heads to see what kind of pistons I have but I assume dished/flat? I am not opposed to running a solid flat tappet but a roller setup might be out of my budget unless the hp numbers would be worth it. I'm just hoping I don't have too much head on my hands for my build if that's even possible... Thanks in advance
↧