i have a 1989 chevy blazer with 7" lift on 38x15x15 wheels with 700r4 with 373 rear swap. 350 std. bore and stroke with .275 dome piston with estimated 11.88:1 compression. I am budget building and wondering what the best cam to use would be. I have stock 193 heads that i will be porting. preferably a torque engine. i was looking at comp cams xtreme 4x4 cam with, 262° Intake / 270° Exhaust, Duration @ .050'' Lift:218° Intake / 226° Exhaust, valve lift with 1.5 rockers .462'' Intake / .480'' Exhaust, and 111 lobe separation. i guess what my question is. can my heads except this amount of lift and is this a good cam for my application. i am hoping for a lope noticeable idol. Its a weekend worrier not a daily driver and only sees road between mud holes. Any and all help would be beneficial.
↧