Have a Holley 4 barrel I got online for my 79 ford.
My question....
Its a 398246-c91 list # 4601, came off of an international v-8 from the early 70's. Has metering BLOCKS front AND rear, power valves and jets FRONT and REAR. Single inlet, and only an accelerator pump on the front.
Needing a rebuild kit, but having trouble.
Will a 4150 style kit work?
Also, this is a 500 cfm carb I believe. What would be a good jet choice to put on a 400 ford with an alluminum intake and headers? Pulls 17-18 inches of vac at idle. Has 50's in the primary and 51's in the secondaries now. Four speed truck used to drive to work and for crappy winter days.
Thanks in advance!!
My question....
Its a 398246-c91 list # 4601, came off of an international v-8 from the early 70's. Has metering BLOCKS front AND rear, power valves and jets FRONT and REAR. Single inlet, and only an accelerator pump on the front.
Needing a rebuild kit, but having trouble.
Will a 4150 style kit work?
Also, this is a 500 cfm carb I believe. What would be a good jet choice to put on a 400 ford with an alluminum intake and headers? Pulls 17-18 inches of vac at idle. Has 50's in the primary and 51's in the secondaries now. Four speed truck used to drive to work and for crappy winter days.
Thanks in advance!!