Got the engine kit from SCAT and the cam k-kit from Lunati
![]()
![]()
Pictures sideways but I got the 9000 series cast 3.75" 400 crank, 6.0" 4340 I-beams, KB Icon forged dish 15cc pistons, Moly rings from Mahle, and ACL bearings. Set up for internal balance. Got it from CNC Motorsports in the Dakota area. Kit is SCAT 90955 procomp street/strip. Everything looks real nice. About $1050 for that with shipping. Nice folks up there.
![]()
Got the cam from Race-Mart. It was about $150-200 cheaper than other places I found. Lunati 20120314K retro-fit hyd. roller, $700 with tax and shipping. The shipping was kinda slow but it was a good deal. It's a hydraulic roller kit: 226/234@.050" .530" 106/112*. It's a complete K-kit (cam, lifters, timing chain, springs, retainers locks,etc). Pretty happy with how it all looks. I've got a bit more stuff to get before I put it together but I figured I share this. I'll probably start putting it together in a few months. Also I'm not sure if the pics worked, for some reason they're not showing up.
Pictures sideways but I got the 9000 series cast 3.75" 400 crank, 6.0" 4340 I-beams, KB Icon forged dish 15cc pistons, Moly rings from Mahle, and ACL bearings. Set up for internal balance. Got it from CNC Motorsports in the Dakota area. Kit is SCAT 90955 procomp street/strip. Everything looks real nice. About $1050 for that with shipping. Nice folks up there.
Got the cam from Race-Mart. It was about $150-200 cheaper than other places I found. Lunati 20120314K retro-fit hyd. roller, $700 with tax and shipping. The shipping was kinda slow but it was a good deal. It's a hydraulic roller kit: 226/234@.050" .530" 106/112*. It's a complete K-kit (cam, lifters, timing chain, springs, retainers locks,etc). Pretty happy with how it all looks. I've got a bit more stuff to get before I put it together but I figured I share this. I'll probably start putting it together in a few months. Also I'm not sure if the pics worked, for some reason they're not showing up.