I was looking for help choosing a cam for a mild 355 motor in a heavy c10 truck, as Its abundntly clean I can't do it haha. Motor is a 355 with a set of 195 runner, 64cc heads, rpm intake, 3.73 gears, 700r4 trans and 2600 summit racing stall. Comp lifters, pushrods and mutha thumpr cam 235/249 @50, double roller timming chain, summit racing 1.5 roller tip rockers, Edelbrock 1406 carb. Motor is a dog down low but comes to life after 2500ish rpm. As it sets now it won't even foot brake a burnout or spin the tires off the line with bald tires. I might add that I truly like the rough sounding idle. Truck primary use is street/strip. But its not oftin that it gets on public roads. Thanks for the help.
↧