Hi all, my name is lorenzo and I'm an Italian enthusiast.
As here is so difficult to have info about chevy V8 engines I need to disturb you for some suggestions.
I'm building a 383 stroker for a '99 chevy tahoe with vortec heads and electronic injection.
I'm starting from an ATK short block with dished 12cc pistons, EQ vortec heads with 170cc intake runner, 64cc combustion chamber, 3/8 stud, 1.6 rocker arms, 0.600 valve max lift.
My big and first problem is to find the perfect camshaft to have real strong torque at low end.
As I drive usually from idle to 3500 rpm on mountain roads I need too much torque around 1000 to 3000 rpm.
I've see too many website in US, as Compcams, Edelbrock, Crane but actually I haven't found a camshaft with needed dyno results.
Did you ave suggestions??
I'm sorry for my english, I hope that have you understand.
Thanks a lot
lorenzo
As here is so difficult to have info about chevy V8 engines I need to disturb you for some suggestions.
I'm building a 383 stroker for a '99 chevy tahoe with vortec heads and electronic injection.
I'm starting from an ATK short block with dished 12cc pistons, EQ vortec heads with 170cc intake runner, 64cc combustion chamber, 3/8 stud, 1.6 rocker arms, 0.600 valve max lift.
My big and first problem is to find the perfect camshaft to have real strong torque at low end.
As I drive usually from idle to 3500 rpm on mountain roads I need too much torque around 1000 to 3000 rpm.
I've see too many website in US, as Compcams, Edelbrock, Crane but actually I haven't found a camshaft with needed dyno results.
Did you ave suggestions??
I'm sorry for my english, I hope that have you understand.
Thanks a lot
lorenzo