I live in the Mt. Pleasant, MI area. I have a no name set of aluminum cylinder heads that I would like to get flow benched. There are no markings on the cylinder heads at all. I have cc'd the heads and came up with...
combustion chamber, 67cc
intake runner, 180cc
angle spark plugs
spread port and standard port exhaust pattern
2.05/1.60 valves
I had these into the machine shop and the guy said they resembled a brodix -8pro cylinder head. He said they may have been a blemished head that had been repaired so they never made it to the point of getting marked.
They are a very nice looking cylinder head, all the ports are very clean looking but I know absolutely nothing about them except for what I stated earlier.
I was just curious if anyone knew of a place in my location that has a flow bench.
combustion chamber, 67cc
intake runner, 180cc
angle spark plugs
spread port and standard port exhaust pattern
2.05/1.60 valves
I had these into the machine shop and the guy said they resembled a brodix -8pro cylinder head. He said they may have been a blemished head that had been repaired so they never made it to the point of getting marked.
They are a very nice looking cylinder head, all the ports are very clean looking but I know absolutely nothing about them except for what I stated earlier.
I was just curious if anyone knew of a place in my location that has a flow bench.